Engineers Develop Method of Detecting Loosened Artificial Hip Implants

A more efficient way has been developed of detecting loosened artificial hip implants.

Engineers developed a diagnostic test that measures the frequency of sound produced when the femur bone in the leg is vibrated. The new method is much more sensitive than the traditional method of using X-RAYs to detect the loosening of implants, and therefore can diagnose much smaller gaps around the implanted joint.

Around 50,000 people receive total hip replacements in the United Kingdom each year, and many will go on to develop pain from them. It is estimated that within 10 years of having an implant, about a quarter of patients will suffer pain from a loosening of the joint, which are joined to their leg bone by special cement.

Surgeons find it difficult to know whether this is due to an infection, which can be cured by antibiotics, or if the joint has loosened, which means surgery is needed. A reliable diagnostic test is vital to save patients undergoing unnecessary surgery.

Dr. James Cunningham, of the University of Bath's (Bath, UK) department of mechanical engineering, developed the new method of placing a piece of vibrating equipment on to the patient's knee, which vibrates the femur and the hip joint. An ultrasound device is attached to the hip and this picks up sound vibrations from the vibrating joint. If the sound's frequencies are ‘pure'--a regular wave of increasing and decreasing frequencies--then they know the joint is firmly fastened to the bone. If the sound waves are impure and irregular, then the clinicians know that the joint has come loose.

Dr. Cunningham said, "The ultrasound method is better than any other method available now, including the traditional X-ray procedure, which can only pick up a large amount of loosening.” He hopes that the National Health Service (NHS) and other medical organizations will use his findings to develop the device for use in hospitals.


Related Links:
University of Bath